RODDI COMMAND

[bagao]

I dont understand about RODDI command.Here is my scenario.I need to route a group to analog trunk,when have call to this analog,all extension of this group will be ring.I don't have Alex library.Please help me to do that.Thanks a lot.
PS: this is route on MXONE TSW
<RODAP:ROU=ALL;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 TL11 H'00000012 H'00000109 H'00002815 NO
59 SL60 H'00100200 H'00000000 H'00010000 NO
60 SL60 H'00100200 H'00000000 H'00010000 NO
61 SL60 H'00100200 H'00000000 H'00010000 NO
62 SL60 H'00100200 H'00000000 H'00010000 NO
63 SL60 H'00100200 H'00000000 H'00010000 NO
66 TL65 H'00000110 H'00000001 H'00000000 NO
73 SL60 H'00000310 H'15400000 H'16400000 NO
74 SL60 H'00000310 H'15400000 H'16700000 NO
and
<ROCAP:ROU=ALL;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 0110000000000010 4 3100100100 0 30 128 00151515 400000000000 001100
59 0110000000000010 5 3100000001 0 30 128 00151515 511110000030 111110
60 7110000000000010 5 3100000001 0 30 128 00151515 111110000030 111110
61 7110000000000010 5 3100000001 0 30 128 00151515 111110000030 011110
62 7110000000000010 5 3100000001 0 30 128 00151515 511110000030 111110
63 7110000000000010 5 3100000001 0 30 128 00151515 511110000030 111110
66 7110100000000010 5 2110000007 0 30 128 00010115 011110121191 111111
73 7110000000000010 5 3100000001 0 30 128 00020215 111100000031 111110
74 7110000000000010 5 3100000001 0 30 128 00020215 111100000031 111110

 

[Monrovia]

Post RODNP:ROU=1,TRU=ALL;

your route 1 is analog trunk. is that the same trunks u want to make changes?

 

[bagao]

Hi Monrovia
ROU TRU DAY NIG

1 001-1 16000 16000
1 001-2 16000 16000
1 001-3 16000 16000
1 001-4 10063 10063
1 001-5 10063 10063
1 001-6 10063 10063
1 001-7 10063 10063
1 001-8 38004 38004

END
Yes, I just have 1 analog trunk connect to MXONE.Please instruct me how to route it?
Thanks

 

[Monrovia]

I hope you might have understood from the above post. It is as simple as that. just read the lines.

route = 1. in one trunk board you have 8 trunk lines. and each trunk line is assigned to different extensions in day mode as well in night mode.

use command RODNI

RODNI:ROU=1,TRU=01-1,DAY=11111,NIG=xxxxxx;

same for each TRU

 

[bagao]

Thanks a lot Monrovia!
I create analog trunk,it works well.
If you don't mind,please keep in touch, I should to learn from you a lot