RODAP and COMMAND LOST

[spacer73]

SysInfo:
BC11SP10, 5 LIMs, TLU80/1 (E&M, TLP22)

ROCAI:ROU=40,SEL=012000000000001,SIG=411110000000,TRAF=00151515,TRM=4,SERV=3100000001,DIST=030,DISL=128,NODG=0,BCAP=001100;
RODAI:ROU=40,TYPE=TL22,VARI=00012000,VARO=04F11000,VARC=010F0002,FILTER=NO;
ROEQI:ROU=40,TRU=3-1,EQU=3-1-52-00;
ROEQI:ROU=40,TRU=3-2,EQU=3-1-52-01;
ROEQI:ROU=40,TRU=3-3,EQU=3-1-52-02;

<RODAP:ROU=40;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
WAIT
WAIT
WAIT
COMMAND LOST

What is this? Message &quot;COMMAND LOST&quot; present only with option &quot;TYPE=TL22&quot;.
If I send comvand RODAI:TYPE=TL22 system say:

<RODAI:ROU=81,TYPE=TL22,VARI=00012000,VARO=04F11000,VARC=010F0002,FILTER=NO;
NOT ACCEPTED
TYPE
NOT IN RANGE

What is this? Please help me!

Andy

P.S. With another unit (TL11,TL37, SL60) all work fine. RFEXI can't solve this problem. ;-)

 

[dognbone]

It sounds like you don't have the program unit TLP22 in the system. Try doing this:

CNPIP:UNIT=TLP22;

This will tell you if the unit is loaded in the system and in which LIM's.

 

[GioBs]

Hi
I agree with dognbone, probably TLP22 is missing in your MD110, but this not justify the COMMAND LOST.
Which was the system answer at ROEQI:ROU=40,... command?

Bye
GioBs

 

[spacer73]

Hi, dognbone and GioBs!

<CNPIP:UNIT=TLP22;

PROGRAM UNIT INFORMATION
PU-NAME PU-NO PRODUCT NUMBER REV PATCH
TLP22 H'39C 4/CAA 111 8765/011 R5A YES
TYPE
B'0000 0000 0000 0000 0001 0011 1000 0000
TYPEEXT
B'0000 0000 0000 0000 1110 0000 0100 1011
LOADED IN LIM
1 2 3 4 5
END

<ROEDP:ROU=40,TRU=ALL;
ROUTE EQUIPMENT DATA
ROU TRU EQU SQU INDDAT CNTRL
40 003-1 003-1-52-00
40 003-2 003-1-52-01
40 003-3 003-1-52-02

END

TLP22 present in system, all call over this route work fine ;-), but not working command RODAP:ROU=40;

Andy

 

[spacer73]

For more information:

<HIREI;
WAIT
EXECUTED
<RODAP:ROU=40;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
WAIT
WAIT
WAIT
COMMAND LOST

<HIMDP;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
09:04:44 28FEB03
DIAGNOSTICS FROM LIM 001

TIME DATE ERROR CODE
09:03:35 28FEB03 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02021FD6
ENTER
SWSW B-LEVEL SIGNAL PROK (H'005B)
FROM OCM (H'017) EXE A IN LIM 001
TO THH (H'3CC) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 7
WITH 0 1 2 3 4 5 6 7 8 9
000 04 02 6D 09 0C 00 17
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 0200367C

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 01 55 B8
NO INFORMATION STORED IN LIM 002
NO INFORMATION STORED IN LIM 003
NO INFORMATION STORED IN LIM 004
NO INFORMATION STORED IN LIM 005

END

Andy

 

[spacer73]

Hi, All!

Problem fixed! I'm restart all PU in station with command SFCEI; All units in system working very fine.

Thanks for All, who helped me with my problem.

Andy