Rls 25.40 FFC PUGR IS NOT WORKING

[MERIDIAN11C]

HELLO TO ALL
I DONT KNOW WHY I CAN'T USE THE FFC *6 (PUGR) TO PICK UP CALLS IF ALL THE STATIONS HAVE THE RNPG 1 AND THE CLS PUA DPUA GPUA, JUST IN ANALOG STATION?
ANY IDEA?

 

[johnpoole]

are you using the spree code and then the *6? if so it may be that rngp 1 is not a valid number, i think rnpg 0 is the only one that you can't use, try changing a couple of phones to rnpg 2 and see if it works

john poole
bellsouth business
columbia,sc

 

[MERIDIAN11C]

thanks johnpoole
i will try this

 

[MERIDIAN11C]

johnpoole
i try with the spre code (1) and the ffc (*6) pugr
and still do the same,and i change two analog stations to RNPG 3 both with CLS DPUA GPUA PUA and cannot picked up
also i try spre(1) and FFC (*6) and the RNPG (3) with any luck

 

[coniglio]

are you positive that 1 is your SPRE?

 

[MERIDIAN11C]

yes, very sure

 

[Nortellian]

ld 21
prt ftr_data
enter through
this will give you your spre

ld 57
prt
ffc
at code prompt put in pugr

This info should help insure you are using the right spre and code.

 

[MERIDIAN11C]

OPT ABDD AHD BIND BIXA BLA BOHD CHDD CFO CFRA
COX CPA CTD DBD DNX DSX DRE
DSTD FACD HTU HVD XBL IC1 IDP XLF
IHD XTG FKA LOD LRA MCI MCTD CUI
MWUD NCD PCMD PSD PVCA RECA REA RND
RTR RTD ROX SBD SDDE SIAD SLD SYD
THPD TTAD VOBA CCBD CWRD HLPD HRLD
CXOD BWTD
DGRP 10
IRNG NO
PKND 2
DNDL NO
SPRE 1
PREO 0
BPSS NO
SRCD 1234
EEST NO
EESD NO
TTBL 1

 

[MERIDIAN11C]

TYPE FFC_DATA
CUST 00
CCRS SRE
SCPL 4
SBUP YES
FFCS YES
STRL 1
STRG #
ADLD 0

 

[MERIDIAN11C]

REQ prt
TYPE ffc
CUST 0
CODE pugr

CUST 00
FFCT YES
PUGR *6

 

[MERIDIAN11C]

CUST 0
WRLS NO
DN 3543 0 MARP
CPND
CPND_LANG ROMAN
NAME Brenda Zarate
XPLN 13
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 1
SGRP 0
RNPG 6
LNRS 16
XLST
SCI 0
SCPW
SFLT NO
CAC_MFC 0
CLS CTD DTN FBD XFA WTA THFA FNA HTD ONS
LPR XRA CWA (ACTIV) SWD PUA MWD RMMD SMWD LPD XHA SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA UDI RCC HBTD IRGD IAMD DDGA NAMA MIND
NRWD NRCD NROD SPKD CRD PRSD MCRD
EXR0 SHL ABDD CFHD
USRD CCBD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
FDSD NOVD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR FDN 3500
DATE 3 MAY 2004

 

[MERIDIAN11C]

and all analog station are in the same way

 

[Nortellian]

To answer a call in your Call Pickup group from an analog (500/2500 type)
telephone, follow these steps:
1 Lift the handset.
2 Dial SPRE 3 or PURN FFC.
You are connected to the caller.

You can try spre than 3 or just *6.

 

[MERIDIAN11C]

thanks Nortellian
i try just *6 and its not working
and then i try spre(1) plus *6(ffc) and is the same

 

[MERIDIAN11C]

when i just dial *6 i just receive busy tone

 

[Nortellian]

did you try spre 3

 

[MERIDIAN11C]

Nortellian you mean,change the spre to digit 3 or just dial 3
above the spre is (1)

 

[Nortellian]

ente spre which is 1 than enter 3. When the phone is ringing pick up the handset of a different phone that is in the same rnpg enter 1 than 3 and see if it picks up the call.

 

[MERIDIAN11C]

oki do ki let me try that

 

[Nortellian]

prt purn in ld 57. c what code that is and just try it without a spre. I'm looking at the difference between group pick up and call pick up.. If your users are in the same rnpg group than spre 3 or entering the purn code should workity work work. Thats about it for my suggestions. Gooden Luckinzie