Rls 25.30 software reinstallation

[bobertb]

Trying to help an old customer recover from a unrecoverable system crash with old r25.30 sw
I've NOT installed anything that old

Given:
[ul]
[li]Opt11 in constant boot cycle complaining about file system errors[/li]
[li]No software onsite[/li]
[li]Has 1 PCMCIA card that has hopefully) backs ups on it- It's not a Nortel Branded card[/li]
[li]Changed out SSC card..No luck[/li]
[li]Ordered a S/W daughter card supposedly loaded with rls 25.30 sw (at least it implies that on the card)[/li]
[li]No way to verify what's on either PCMCIA card - no PC with PCMCIA slot (didn't check a the dump for one LOL)[/li]
[/ul]

Status
[ul]
[li]Now that "new" s/w daughter card is installed[/li]
[li]System in continous loop wanted you to do a I^ and insert software delicery card.[/li]
[li]Do I have any options?[/li]
[li][/li]
[/ul]

 

[yyrkroon]

Looks like you have a blank S/W db. You'll need to perform the steps being prompted

 

[tball1]

Check pbxbook.com and ghtrout.com I have used the option 11 stuck in ini loop

 

[Tacosoup]

Here is the link:

http://www.ghtrout.com/files/Restore_Guide_Opt11c.zip

** Proofread carefully to see if you any words out.

 

[Firebird Scrambler]

If you need the software, then contact me. Make sure that the PCMCIA card is no greater than 128 megs and that it is a SanDisk as few other makes work!.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[mikepbx1]

It's here too:

http://pbxbook.com/meridian/maint/iniloop.html

http://pbxbook.com