Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rls 11 SIP URI help

Status
Not open for further replies.

Trason806

Technical User
Sep 18, 2009
119
US
the SIP line URI changed with rls 11. Does anyone have a good guild that explains what all these options do now?

i need to push the contact field of the user sip tab.

on rls 9.1 i had the URI like this:
Local URI --- *
Contact --- use internal data
Display name --- *
 
This is how I do it

SIP_uwskr2.jpg




| ACSS SME |
 
That is not working for me. What i need to do is change the "contact" sip header. i assume that what i need to change is the "content - contact" drop down.

The help says the options are
Auto: Use the number that IP Office is using to make the call as the From field. The number will be aligned with IP Office internal numbering schema. --- this ends up pushing the 4 digit ext of the user.

Use Internal Data: Use the value User | SIP | Display Name (Alias) for the user making the call. --- this pushes the (User|SIP|Name) of the user (not User|SIP|Display Name). so the help is wrong.

i don't see an option to change the contact sip header to the (user|sip|contact)

i am using 11.0.4.1.0 build 11
but i had the same issue with 11.0.4.0
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top