andrew4728
Technical User
Howdy, I'm having problems with RIP between a 2511 and a 2501. my setup is pretty simple, and I am pretty much messing with RIP to learn it right now.
My setup is as follows :
Cable modem <-E0-> 2511 <E1> Switch <-> computers
AND 2511 <S0> 2501
nothing is plugged into the 2501 at this time.
I have rip setup and working internally, both routers can communicate with each other perfectly fine, the 2501 can ping my pcs on my network, but I am trying to get RIP to advertise my cable connection over to the 2501. I can't seem to get it to work right and though perhaps someone could give me some pointers?
Now bare with me, I am quite new with Ciscos and some of the commands I have in my config I'm not even 100 percent sure of, so if you see something stupid, or confusing, let me know!!
PS, right now I have no RIP entries in for my cable modem connection as I am not sure what to put. I have tried several things, including my ISPs default gateway network, and 0.0.0.0, but not luck.. was not able to find this info on the FAQ/forum/google
** R1 2511 **
Current configuration : 2229 bytes
!
!
version 12.2
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
!
hostname "R1"
!
enable secret
enable password
!
clock timezone Central -5
ip subnet-zero
no ip source-route
ip name-server 68.13.x.x
ip name-server 68.13.x.x
!
ip dhcp pool client
import all
network 192.168.1.0 255.255.255.0
dns-server 68.13.x.x
default-router 192.168.1.1
!
!
!
!
interface Ethernet0
description CABLE MODEM
ip address dhcp client-id Ethernet0
ip access-group 100 in
ip nat outside
no ip mroute-cache
no cdp enable
no mop enabled
!
interface Ethernet1
description LAN SWITCH
ip address 192.168.1.1 255.255.255.0
ip access-group 101 in
ip nat inside
no ip mroute-cache
no cdp enable
!
interface Serial0
ip address 192.168.2.1 255.255.255.0
!
interface Serial1
no ip address
shutdown
!
router rip
network 192.168.1.0
network 192.168.2.0
!
ip nat inside source list 101 interface Ethernet0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 68.13.32.1 254
no ip http server
!
line con 0
line aux 0
line vty 0 4
password 7
login
!
end
** R2 2501 **
Current configuration:
!
version 11.1
service slave-log
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname R2
!
enable secret
enable password
!
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
ip address 192.168.2.2 255.255.255.0
clockrate 4000000
!
interface Serial1
no ip address
shutdown
!
router rip
network 192.168.2.0
!
ip default-gateway 192.168.2.1
ip name-server 68.13.x.x
ip name-server 68.13.x.x
no ip classless
!
line con 0
line aux 0
line vty 0 4
password
login
!
end
Thank you for all your help!
My setup is as follows :
Cable modem <-E0-> 2511 <E1> Switch <-> computers
AND 2511 <S0> 2501
nothing is plugged into the 2501 at this time.
I have rip setup and working internally, both routers can communicate with each other perfectly fine, the 2501 can ping my pcs on my network, but I am trying to get RIP to advertise my cable connection over to the 2501. I can't seem to get it to work right and though perhaps someone could give me some pointers?
Now bare with me, I am quite new with Ciscos and some of the commands I have in my config I'm not even 100 percent sure of, so if you see something stupid, or confusing, let me know!!
PS, right now I have no RIP entries in for my cable modem connection as I am not sure what to put. I have tried several things, including my ISPs default gateway network, and 0.0.0.0, but not luck.. was not able to find this info on the FAQ/forum/google
** R1 2511 **
Current configuration : 2229 bytes
!
!
version 12.2
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
!
hostname "R1"
!
enable secret
enable password
!
clock timezone Central -5
ip subnet-zero
no ip source-route
ip name-server 68.13.x.x
ip name-server 68.13.x.x
!
ip dhcp pool client
import all
network 192.168.1.0 255.255.255.0
dns-server 68.13.x.x
default-router 192.168.1.1
!
!
!
!
interface Ethernet0
description CABLE MODEM
ip address dhcp client-id Ethernet0
ip access-group 100 in
ip nat outside
no ip mroute-cache
no cdp enable
no mop enabled
!
interface Ethernet1
description LAN SWITCH
ip address 192.168.1.1 255.255.255.0
ip access-group 101 in
ip nat inside
no ip mroute-cache
no cdp enable
!
interface Serial0
ip address 192.168.2.1 255.255.255.0
!
interface Serial1
no ip address
shutdown
!
router rip
network 192.168.1.0
network 192.168.2.0
!
ip nat inside source list 101 interface Ethernet0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 68.13.32.1 254
no ip http server
!
line con 0
line aux 0
line vty 0 4
password 7
login
!
end
** R2 2501 **
Current configuration:
!
version 11.1
service slave-log
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname R2
!
enable secret
enable password
!
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
ip address 192.168.2.2 255.255.255.0
clockrate 4000000
!
interface Serial1
no ip address
shutdown
!
router rip
network 192.168.2.0
!
ip default-gateway 192.168.2.1
ip name-server 68.13.x.x
ip name-server 68.13.x.x
no ip classless
!
line con 0
line aux 0
line vty 0 4
password
login
!
end
Thank you for all your help!