Ring phone or hunt group when a door is opened 2

[mikegillespie]

Hi all

I am looking to have a phone of hunt group ring in a long-term care environment when a door gets opened. We are using a new IP Office for the telephony.

Panasonic has their KX-TDA0164 4-port input/output sensor card that does this.

Does anyone know of a method of doing this on IP Office?

Thanks

Mike

 

[TouchToneTommy]

https://www.vikingelectronics.com/wp-content/uploads/documents/product_manual/K-202-DVA.pdf

https://www.vikingelectronics.com/wp-content/uploads/documents/product_manual/K-2000-DVA.pdf

2 or 8 inputs. When an input is triggered, this places a call to a programmed number and delivers up to a 1 minute recorded message. Connect to an analog station port, program the extension or group that should be called depending on which input has been triggered

 

[mikegillespie]

Amazing!
Thank you

Mike

 

[budbyrd]

If you are cheap and don't need the message you can put a 600 ohm resistor across the contact and program the extension as a ring down. The system will see it as off hook and dial what ever extension you want.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'