Ring on both exts.

[scs5000]

Hi, it is 11c, rls 4.5, need following setup.
Digital ext DN=400
Analog ext DN=255

There are 2 XUT(COT) lines and when a call hits any of these 2 XUT line then both above analog and digital ext must ring at same time and can pick the call.
Further they can access there assigned line (2 XUT , one for each extension for dial out).

Any help in this,
Regards

 

[GHTROUT]

Add DN 255 to the digital phone.

Set the COT route to AUTO=YES, then change the COT trunks ATDN to 255

Give the ACCD of the COTs to each person.

GHTROUT.com | FAQs | Recent Replies

 

[scs5000]

In this case if an internal extension dial 255 then both ext. will ring also, they need only external call shud ring at bot.
regards

 

[GHTROUT]

Then replace the analog with a digital set and make the two trunks PVR lines on each phone.

GHTROUT.com | FAQs | Recent Replies