Ring Group Problem MCD 6.0

[steveycarr]

Hi Guys,

I've got a Customer who wants all phones to ring on I/C Calls so I've put all the sets into a Ring Group pointed my Trunks to the Ring group and as expected all the phones ring together, however the 5330 Sets display shows both the I/C Calling Line ID and the Ring Group Number but a 5312 Set and all of my other sets which are 5610 IP Dect Phones only show the Ring Group Number. If I point the trunk to one any single 5610 Set it shows the I/C Calling Line ID correctly as expected

I've been through all of the usual COS changes and and cant find a way to display the I/C Calling Line ID only, any ideas would be much appreciated. I'm happy to re-configure in anyway to get what I need if any one can think of a better way...........

Cheers

Steve

!ExtraDunce

 

[yankblan]

Caller ID on ring groups will be addressed on 7.0, unfortunately

ACSS-SME

http://interconnexionsld.ca/