Ring down to Overhead speaker system -CS1000 1

[babytech2009]

Hello all,

Is there anyway to make a 3904 gym phone ring the overhead speaker system without having to press any button?

gym phone pick up handset - ring PA


I have yet to come across this type of setup.

 

[babytech2009]

DES PAGING
TN 000 1 01 00 VIRTUAL
TYPE COT
CDEN 8D
CUST 0
XTRK EXUT
FWTM NO
TIMP 600
BIMP 3COM
AUTO_BIMP NO
TRK ANLG
NCOS 0
RTMB 2 1
NITE
SIGL LOP
SUPN NO
AST NO
IAPG 0
CLS UNR DTN CND ECD WTA LPR APN THFD SPCD
P10 NTC
TKID
AACR NO
DATE 6 JUN 2008

 

[GHTROUT]

I'd be checking to see if the connection to the paging really expects a "trunk" or a "station" connection.

The "solid tone" you hear - is that through the speakers or the phone?

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[babytech2009]

the tech tested on site and this is the response.

"no sound over the speakers, long tone on reciever

 

[GHTROUT]

That tone would be coming from the paging system. Does the paging system require some digits to be dialed?

A test would be simply dialing 8002 from another phone. Does that (still) work?

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[babytech2009]

the paging does not work on any other phones. Could it be because i changed Mano to yes from no? the other changes above i did not make yet.

 

[GHTROUT]

If it worked from other phones before MANO=YES, then change MANO back to NO. Has the paging ever worked? Are you certain it is hooked up right?

The MANO=YES would not stop the paging from working as far as I know....but if it did not help, it's best to take the "Default" of MANO=NO

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--

 

[trvlr1]

Were you able to page from any phone prior to you making any changes and if so, was that by dialing 8002 or some other number?

 

[babytech2009]

I will check once the tech comes back online. I would say it did but i can confirm.

 

[rajbabu12]

as bhassell2000 says...
hot d XX dn

the XX is number of digits...

 

[babytech2009]

Okay I changed MANO back to yes.
I am showing the prior to the change for route 2
and after with updating the mano to no again for route 2

Prior to being touched at all.
TYPE RDB
CUST 00
ROUT 2
DES PAGING
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG OGT
RANX NO
SRCH LIN
STEP
ACOD 8002
CPP NO
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 3
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
TFD 60
LEXT 100
SST 3 0
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
CDR NO
MUS NO
MR NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0


PAGE 005

FRL 5 0
FRL 6 0
FRL 7 0
TDET NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

After changing mano back to no from yes_ current configuration

TYPE RDB
CUST 00
ROUT 2
DES PAGING
TKTP COT
NPID_TBL_NUM 0
PRIV NO
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG OGT
RANX NO
SRCH LIN
STEP
ACOD 8002
CPP NO
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 3
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512
TFD 60
LEXT 100
SST 3 0
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
CDR NO
MUS NO
MR NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TDET NO


PAGE 002

TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

 

[babytech2009]

For Paging I read on here thread below

http://www.tek-tips.com/viewthread.cfm?qid=1528091&page=1

a person changed on rdb from COT to WAT.

However when I tried it, I was not able to. I think I need to build new one with WAT can RDB be 2 for both or do I have to remove the current one then build the new RDB 2 for the Dial Pause when paging to work?

Thanks!

 

[bhassell2000]

If you have a trunk port to page you will have to change that too

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/pub/buddy-hassell/7/5a5/b8b