RightFax on 3300ICP

[loopretnav]

I have a customer that has an E1 circuit using DID.
They want to use DID to connect to RightFax server.

I created a key on each telephone and had these
directory numbers re-route always to a huntgroup that
has the 2 analog ports on the controller as members.

Calls are going to RightFax but faxes are going to the
general mail and not to the individual mail.

Is there any special equipment needed to get this working.
Is there any special programming.

 

[12345kevin]

Does the Hunt Group need to be set as voicemail so that the "digits" are sent into the Fax Server ?

 

[loopretnav]

I am not sure how hunt group needs to be set.
The DID digits needs to be sent to the FAxServer.

 

[IPTechTel]

If you set in COS of the analogs ports Option COV/ONS voice mail ports, you will receive the 4 digits of the station (DID) on your Fax system.
Set your Hunt group type to VoiceMail.