I have a cluster which is wired incorrectly? I would like to move the SSA cables to the correct locations on the SSA enclosure. Is there a problem when SSA cables on an adapter are moved to different locations on the SSA drawer? It seems to me that as long as the system can get to the drive, it shouldn't matter. It's no different than a failure and the bypass card closing the loop. Any thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rewiring SSA drawers
- Thread starter syjl
- Start date
markiemark
Technical User
I'd agree with your view on this. As long as the system has a route to the disk then moving the cabling should be fine.
Having said that, we always make sure we do this with the system shutdown anyway.
Marko
Having said that, we always make sure we do this with the system shutdown anyway.
Marko
- Status
Similar threads
- Locked
- Question