Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reuse Image (Raster)
- Thread starter tal6499
- Start date
- Thread starter
- #2
If the image is defined as a macro, then you can call the macro as many times as you need it. If this is a logo that you just want to print at the same position om every page, you can enable the macro as an automatic overlay and the printer will do all the work for you.
See the chapter on macros in the PCL5 tech reference. You might also go to my website and grab a copy of the MKPCL manual for some
help as well.
Jim Asman
See the chapter on macros in the PCL5 tech reference. You might also go to my website and grab a copy of the MKPCL manual for some
help as well.
Jim Asman
- Thread starter
- #4
- Thread starter
- #5
No, not as such, but...
If you have 2 or three different sizes, make a different macro for each of the sizes, download them all to the printer at the head of the job, and then logic in your application would call the appropriate macro when needed.
You need to give a bit more detail as to what you are doing.
Jim Asman
If you have 2 or three different sizes, make a different macro for each of the sizes, download them all to the printer at the head of the job, and then logic in your application would call the appropriate macro when needed.
You need to give a bit more detail as to what you are doing.
Jim Asman
- Thread starter
- #7
This is the scenario:
I get some images first then the details where these images are to be placed. Detail contain there position on those pages with sizes.
Will it be possible to construct the PCL image once and place it on different pages with required sizes?
Currently images are placed with copies on all pages.
e.g if an image is required on 40 pages. it will be constructed as PCL raster 40 times with the required resolution on that page.
I get some images first then the details where these images are to be placed. Detail contain there position on those pages with sizes.
Will it be possible to construct the PCL image once and place it on different pages with required sizes?
Currently images are placed with copies on all pages.
e.g if an image is required on 40 pages. it will be constructed as PCL raster 40 times with the required resolution on that page.
The only way you could change the size at the PCL level would be to print the image at different resokutions, This is not likely to be satisfactory for sizing or quality.
In the 40 versions of the image, how many different sizes are there?
Jim Asman
In the 40 versions of the image, how many different sizes are there?
Jim Asman
- Thread starter
- #9
- Thread starter
- #10
Are you compressing the raster data when the pcl file is created?
How are you creating the raster data to begin with? I assume that you are supplied a .bmp or whatever image file. Yes?
If you have potentially 40 different sized images in the same job, I don't see how you could avoid having 40 different raster pcl images.
Jim Asman
How are you creating the raster data to begin with? I assume that you are supplied a .bmp or whatever image file. Yes?
If you have potentially 40 different sized images in the same job, I don't see how you could avoid having 40 different raster pcl images.
Jim Asman
- Thread starter
- #12
Perhaps use 'arbitrary' Raster Scaling in conjunction with a macro storing the 'base' raster image?
Arbitrary scaling is only available on a few printers (perhaps large colour or greyscale capable devices?)
It requires use of the 'Configure Image Data', 'Destination Raster Width' and 'Destination Raster Height' sequences.
... and before you ask, I haven't tried anything like this myself!
Arbitrary scaling is only available on a few printers (perhaps large colour or greyscale capable devices?)
It requires use of the 'Configure Image Data', 'Destination Raster Width' and 'Destination Raster Height' sequences.
... and before you ask, I haven't tried anything like this myself!
- Thread starter
- #14
>>Perhaps use 'arbitrary' Raster Scaling in conjunction with a macro storing the 'base' raster image?
>>It requires use of the 'Configure Image Data', 'Destination Raster Width' and 'Destination Raster Height' sequences.
ok,
could you plz elaborate these terms.
i have not seen any thing like this in hp manuals.
i had the idea of a macro for base raster, but it failed due to different resolutions.
- Thread starter
- #16
- Status