Return Analog Station to Dialtone on Hangup

[tomskillman]

I remember seeing an option that caused an analog station port to return to dialtone when the far end hung up. Can anyone tell me what that was - I think it was a CLS setting, but can't remember for the life of me which one. Thanks.

 

[johnpoole]

i haven't seen that one

john poole
bellsouth business
columbia,sc

 

[tomskillman]

I ran across it when playing with the door intercom I was trying to set up. I now have a different door intercom made by Viking that will disconnect on a return to dialtone...so if I can enable that, my problems will be solved.

 

[MrPederman]

In the modem lines CLS you could try LDTA for Line Disconnect Tone Allowed

You could look at these FTR's as well.

ISP 1-(75)-255 basic-21
Enable hook flash disconnect supervision with flash timer in1 0 milliseconds units. If the numeric parameter is not
entered and the saved value is null, it is defaulted to 75
(750 ms). Otherwise, it does not change.

OSP (1) Enable battery reversal answer and disconnect supervision
for outgoing calls with absolute and assumed answer
indication.