Restrictions for External Paging through a COT port 3

[jose22]

Hello everybody,
Here we have a paging system through a COT port, the access code for paging is *7 but all stations can page and I Want just one station to page (ext. 3100) and for the other stations I want to block the paging service.

I got this :
200>*7:159
10>327059
14>01091059

The stations are Assigned to Service Restriction Class A: 13, 14 and 15, so I assigned Class A 12 to it.

1202>3100:1214
1508>12:1
1508>13 to 15:0

But all stations can still page.
Thank you very much if somebody can help me to block the paging from the others station.

 

[OzzieGeorge]

Ok so you are approaching this from the wrong angle. *7 is programmed as a cot access code not a paging access code so you will have to restrict it in other ways.

Tennancy would probably be the easiest way.

 

[grh959]

Why not delete the access code and program a button for a Direct Trunk access on the station.

9000>3100,xx059

xx = button you want to have the trunk on

Then delete the *7 access code in CMD 200. Save a whole ton of programming!

 

[OzzieGeorge]

grh959

Excellent solution, I never even considered it (assuming it is a Dterm)

 

[jose22]

Thank you for your answers,
I can't programm a button for a Direct Trunk access because all the station's buttons are used and needed, so, all the stations use tenant number 01 and the Numbering Plan Group 0 (710), I tried to copy on CMD201 the information I found on CMD200 and I entered this:
29>02:711
1204>3100:02
But I can't even reach the station 3100, so I changed it back to 1204>3100:01

If you can help me I will appreciate it. Thank you.

 

[belevedere]

Thinking outside the box, the answer key is rarely used. Why not program the paging on the answer key. On the IPS it's button 95.

 

[jose22]

Thank you very much belevedere, I entered 9000>3100,95:F0159 for the trunk route and it worked perfectly. Thank you man.