Restore System Image 1

[stolze3]

Can I restore a system image created in a non-RAID environment into a RAID 1 array environment?

The attempt to restore proceeds to the final step, the restart, but will not boot into the new system image in the RAID 1 array. Startup Repair cannot fix the problem.

 

[stolze3]

To amplify my previous post:
Startup Repair Log
System Disk=\Device\Harddisk0
Windows Directory = C:\Windows
AutoChk Run=0
Number Root Causes =1

Root Cause Found: Unspecified Changes to system configuration might have caused problem.
Repair Action
System files integrity check and repair
Result: Failed. Error Code = 0x490
Time Taken: 531885 ms

Motherboard: Intel DP67BG

 

[BadBigBen]

firstly, which imaging software are we talking about?

read this discussion with a possible fix, if it is a Windows_Image that we are talking about:

System Image file won't restore on newly created RAID mirror

http://answers.microsoft.com/en-us/...-created/9a968d83-ca5a-4a71-85e2-a013d209c713

other than that, I can only recommend that you would use a cloning tool or image utility such as:

Paragon Migrate OS to SSD

http://www.paragon-software.com/technologies/components/migrate-OS-to-SSD/

or better yet

Drive Copy 11 Professional

http://www.paragon-software.com/home/dc-professional/

Ben
"If it works don't fix it! If it doesn't use a sledgehammer..."
How to ask a question, when posting them to a professional forum.
Only ask questions with yes/no answers if you want "yes" or "no"

 

[rclarke250]

Did you install the raid drivers into the system image, if not, then no it won't boot.