Restart Micom Marathon 3k

[RamAtlanta]

Hi, i have a Marathon 3K, when turn on the equipment ask me Enter Class
Enter Class Password

I have not class and Class Password either, ¿How can i clear all and start again?

Thanks for information

 

[Guest_imported]

Try hitting Ctrl-X then Ctrl-Break

 

[aojz]

Might as well start out with the easy solution. Connect to port A-6 When it asks for Class, type $CMD <cr> then when it asks for password just hit enter (no password).

If that doesn't work, you will have to dissasemble the unit to get to the CCM board (bottom board) Take note of the order you remove any boards as they should go in in the reverse order (last out, first in).

Find the battery (should be located towards the fron of the machine a few inches from the power supply). There should be a jumper located near the battery. Remove the shunt, wait a few minutes then re install the shunt.

Reassemble the unit, power the unit and try again, you should have full access.