Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RESIZING DIRECTOR MOVIE ON OUTPUT - URGENT!!!!!!

Status
Not open for further replies.

vicborg

Technical User
Oct 3, 2006
1
AU
Hi Everyone

I have created a Director Movie at a size of 1200 x 900.
I did it this way because my screen is 1680 x 1050 and that size seemed to fit snug inside my monitor.

Stupid me didn't take into consideration that this file will be used on PC's which have a max screen resolution of 1024 x 768. So now that i have finished the job i need to create a projector file for PC which will constrain the exact proportions of my movie into that of the PC's.

I have tried so many different variations of projetor files and cannot find the one that i need to use. The projector files i create do not show the whole stage of my movie. It simply keeps its own pixel proportions so i cant see all of my movie.

I know how to reduce the stage size in the propertires panel but i want it to reduce my whole movie in one hit in the post production process, similarly to how you can resize a .swf file using HTML.

I need URGENT help with this.
Cheers
 
You can use lingo to resize the stage, and the drawrect of the stage, which are both subtley different things.

Here's a handler which I often use to maximise a projector, while preserving the ratio of the movie (if it's different to the screen res ratio):

Choose whether you want preserveProportions to be 1 or 0.

--------------------------------------
-- stage resize handler
-- robotduck.com 2006

on resizeToScreen

preserveProportions = 1

myW = the stage.rect.width
myH = the stage.rect.height

myRatio = float(myW)/myH

screenRect = the desktoprectlist[1]
sw = screenRect.width
sh = screenRect.height

screenRatio = float(sw)/sh

(the stage).rect = rect(0,0,sw,sh)

if preserveProportions then

if myRatio<=screenRatio then
-- stage is proportionally narrower than screen - maximise height
drawH = h
drawW = integer(myW * (h/float(myH)))

else
-- stage is proportionally narrower than screen - maximise width
drawH = integer(myH * (w/float(myW)))
drawW = W
end if

drawLeft = (w/2)-(drawW/2.0)
drawRight = (w/2)+(drawW/2.0)
drawTop = (h/2)-(drawH/2.0)
drawBottom = (h/2)+(drawH/2.0)

(the stage).drawrect = rect(drawLeft,drawTop,drawRight,drawBottom)

else
-- expand without preserving movie proportions (simple stretch-to-fill)
(the stage).drawrect = rect(0,0,w,h)

end if

end
-----------------------------------------------
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top