mikegillespie
Instructor
Aside from resetting the system, is there a way that the main Installer password (default=266344) can be reset. I have encountered a system I can't access and nobody knows the password.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reset System Password
- Thread starter mikegillespie
- Start date
- Status
fireeater
Technical User
- Dec 10, 2008
- 780
you can use a rad to reset it but you need the correct version of remote utilities to use the browser
HALLOWED ARE THE ORI
mike
HALLOWED ARE THE ORI
mike
curlycord
Programmer
- Thread starter
- #6
mikegillespie
Instructor
The mics is software version 6.1.
yes, where is this FAQ?
yes, where is this FAQ?
endlesswinter
IS-IT--Management
scrool up to the top of this page and you will see a tab that says FAQ.
- Thread starter
- #8
mikegillespie
Instructor
Sorry, I know the FAQ section very well but haven't found one that address this issue.
Thanks
Thanks
endlesswinter
IS-IT--Management
- Status
Similar threads
- Locked
- Question
- Locked
- Question