Reset Password on CS1000

[cutech]

How do you reset the administrative password on a CS1000?

 

[KCFLHRC]

If you don't have UCM then you can log in with the admin 2 password to change them. If you have UCM the admin password is set during the installation during initial configuration of your Primary Security Server.

 

[KCFLHRC]

If you have UCM then look here

http://pbxbook.com/meridian/ucmpwd.html

 

[cutech]

Is there a default admin 2 password?

 

[KCFLHRC]

I don't believe we are to disclose password info on the forum.

 

[TudorAdrian]

Rats..if you need to reset the admin2 password you can only do that using the software delivery card you used to install the system...at least that's the only way I know of anyway.

 

[Firebird Scrambler]

There are people who know how to view/reset passwords for a number of releases. Anything less than 4.0 is possible and 4.5 onwards it's been inproved to prevent viewing them, but a reset method is available. What release is the CS1000 System?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[cutech]

Release 6.0

 

[Tman45]

Yeah I think we misplaced our Admin2 password so that will be cool if Mike's book works for us - thanks KCFLHRC!!!

 

[Splic3d]

E-Metro Tel will assist with this for a fee if you don't have a contract or vender associated with AVAYA. They are former Nortel engineers. You may have to go through a UCx partner though.

http://www.emetrotel.com/

http://www.i3techgroup.com

If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx