Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reset DN's 2

Status
Not open for further replies.

NortelGuy585

Technical User
Oct 20, 2010
32
US
I remember there was a way to reset the DN's all to factory settings or was that a dream? want to attempt this on a MICS 7.1.. and once i do that do i need to reset the call pilot that's attached? I don't have to right unless the recorded digits change?.. now this is a 2 port call pilot should it be connected to a certain port/s?

- Keith "Norstar Newbie"
 
To rest the system do a ** STARTUP but it need to be on a power up with in 15 minutes. CP needs to do a REINSTALL this is done in adminisrtation under 1. And the CP ports can be anywhere bu usually it's on the last ports.
 
do i reinstall call pilot before i do DN reset or after?

- Keith "Norstar Newbie"
 
wow great! that worked like a charm! thanks guys!

- Keith "Norstar Newbie"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top