Reset CICS 4.1 password

[jman1960]

Anyone know how to reset the default password on a CICS system with 4.1 software. I tried the debug faq but has the address for 1.0 software and removing expansion cards didn't work

thanks

 

[mmazza]

Are you just wantin to clean the system. restore it back to defaults?
If so you can shut it off and power it back on and preform a start up within 10 mins of startup
when time and date appears on the 73xx series phone
press F**startup <---spelled out on the keypad
Password 266344
then just run thu the proceess chose your template and DN leanth
then apply
Mario Mazza
Telecommunications Specialist

 

[jman1960]

restoring it to defaults is fine, I've tried the above but it does not take the default password 266344.

thanks

 

[samh30]

You can either open the system and short the Battery (capacitor) for about one minuet and thats will restore the defaults including the password,or if you have a fast Rad you connected it to the system and use the remote tools (Browsing) and you will be able to see the password and you can change it then.I hope that helps. Good Luck!

http://www.samhassan.com

 

[engenius]

jmam1960
Email me at engenius@vaxxine.com and I will give you the memory dump address for 4.1

 

[MontrealSoft]

Memory dump address ?

I'm interested in knowing what you're talking about...

I know what's a memory dump, and I know norstar systems quite well, but you got me there...

Luc