Reseating T1 Card

[NorstarOption]

If I have to reseat loop 46, do I have to disable dch 15 and 16 first? Dch 15 is the primary and dch 16 is the backup and both dch's are servicing loop 46.

And also what's the asterisks means right next to each channels?

PRI* TRK LOOP 10 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - BUSY DID VCE * CH 02 - BUSY DID VCE *
CH 03 - IDLE DID VCE * CH 04 - BUSY DID VCE *
CH 05 - BUSY DID VCE * CH 06 - BUSY DID VCE *
CH 07 - BUSY DID VCE * CH 08 - BUSY DID VCE *
CH 09 - BUSY DID VCE * CH 10 - BUSY DID VCE *
CH 11 - BUSY DID VCE * CH 12 - BUSY DID VCE *
CH 13 - BUSY DID VCE * CH 14 - BUSY DID VCE *
CH 15 - IDLE DID VCE * CH 16 - BUSY DID VCE *
CH 17 - IDLE DID VCE * CH 18 - IDLE DID VCE *
CH 19 - IDLE DID VCE * CH 20 - IDLE DID VCE *
CH 21 - IDLE DID VCE * CH 22 - IDLE DID VCE *
CH 23 - IDLE DID VCE * CH 24 - DCH 15
.stat 46

PRI* TRK LOOP 46 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VCE * CH 02 - IDLE DID VCE *
CH 03 - IDLE DID VCE * CH 04 - IDLE DID VCE *
CH 05 - IDLE DID VCE * CH 06 - IDLE DID VCE *
CH 07 - IDLE DID VCE * CH 08 - IDLE DID VCE *
CH 09 - IDLE DID VCE * CH 10 - IDLE DID VCE *
CH 11 - IDLE DID VCE * CH 12 - IDLE DID VCE *
CH 13 - IDLE DID VCE * CH 14 - IDLE DID VCE *
CH 15 - IDLE DID VCE * CH 16 - IDLE DID VCE *
CH 17 - IDLE DID VCE * CH 18 - IDLE DID VCE *
CH 19 - IDLE DID VCE * CH 20 - IDLE DID VCE *
CH 21 - IDLE DID VCE * CH 22 - IDLE DID VCE *
CH 23 - IDLE DID VCE * CH 24 - IDLE DID VCE *
.stat 3

PRI* TRK LOOP 3 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VCE * CH 02 - IDLE DID VCE *
CH 03 - IDLE DID VCE * CH 04 - IDLE DID VCE *
CH 05 - IDLE DID VCE * CH 06 - IDLE DID VCE *
CH 07 - IDLE DID VCE * CH 08 - IDLE DID VCE *
CH 09 - IDLE DID VCE * CH 10 - IDLE DID VCE *
CH 11 - IDLE DID VCE * CH 12 - IDLE DID VCE *
CH 13 - IDLE DID VCE * CH 14 - IDLE DID VCE *
CH 15 - IDLE DID VCE * CH 16 - IDLE DID VCE *
CH 17 - IDLE DID VCE * CH 18 - IDLE DID VCE *
CH 19 - IDLE DID VCE * CH 20 - IDLE DID VCE *
CH 21 - IDLE DID VCE * CH 22 - IDLE DID VCE *
CH 23 - IDLE DID VCE * CH 24 - IDLE DID VCE *
.stat 34

PRI* TRK LOOP 34 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VCE * CH 02 - IDLE DID VCE *
CH 03 - IDLE DID VCE * CH 04 - IDLE DID VCE *
CH 05 - IDLE DID VCE * CH 06 - IDLE DID VCE *
CH 07 - IDLE DID VCE * CH 08 - IDLE DID VCE *
CH 09 - IDLE DID VCE * CH 10 - IDLE DID VCE *
CH 11 - IDLE DID VCE * CH 12 - IDLE DID VCE *
CH 13 - IDLE DID VCE * CH 14 - IDLE DID VCE *
CH 15 - IDLE DID VCE * CH 16 - IDLE DID VCE *
CH 17 - IDLE DID VCE * CH 18 - IDLE DID VCE *
CH 19 - IDLE DID VCE * CH 20 - IDLE DID VCE *
CH 21 - IDLE DID VCE * CH 22 - IDLE DID VCE *
CH 23 - IDLE DID VCE * CH 24 - IDLE DID VCE *
.stat 44

PRI* TRK LOOP 44 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VCE * CH 02 - IDLE DID VCE *
CH 03 - IDLE DID VCE * CH 04 - IDLE DID VCE *
CH 05 - IDLE DID VCE * CH 06 - IDLE DID VCE *
CH 07 - IDLE DID VCE * CH 08 - IDLE DID VCE *
CH 09 - IDLE DID VCE * CH 10 - IDLE DID VCE *
CH 11 - IDLE DID VCE * CH 12 - IDLE DID VCE *
CH 13 - IDLE DID VCE * CH 14 - IDLE DID VCE *
CH 15 - IDLE DID VCE * CH 16 - IDLE DID VCE *
CH 17 - IDLE DID VCE * CH 18 - IDLE DID VCE *
CH 19 - IDLE DID VCE * CH 20 - IDLE DID VCE *
CH 21 - IDLE DID VCE * CH 22 - IDLE DID VCE *
CH 23 - IDLE DID VCE * CH 24 - IDLE DID VCE *
REQ prt
TYPE adan dch 16

ADAN BKUP DCH 16
PDCH 15
CTYP MSDL
GRP 1
DNUM 14
PORT 0
BCHL 50
RCVP NO
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID 14
RCAP COLP
MBGA NO
OVLR NO
OVLS NO
PRI INTERFACE ID
046 2
003 4
034 5
044 6
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO

REQ prt
TYPE adan dch 15

ADAN PRIM DCH 15
BDCH 16
CTYP MSDL
GRP 0
DNUM 15
PORT 1
DES Focal_TG_1
USR PRI
DCHL 10
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID 14
RCAP COLP
MBGA NO
OVLR NO
OVLS NO
PRI INTERFACE ID
046 2
003 4
034 5
044 6
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO

 

[johnpoole]

because the d's are not on that card, the only need to dis dch is inorder to disl the loop.. you do not need to disl msdl.. dis dch 16 auto, dis dch 15 auto from 96 and disl 46 in 60.. then reseat, you need to be carefull that that card does not have daughter cards.. the * is pri.. when you dis the d's, calls will not drop on the other pri's you can't get new calls.. i would disi 46, that disables the channels when idle.. then take the d's down, i always dis the d's to avoid a possible ini.. remember after the enll, lcnt

john poole
bellsouth business
columbia,sc

 

[NorstarOption]

can you re-phrased that John, please? I have to disable both d-channels even though the d's are not on that card.

 

[acewarlock]

LD 96
dis dch 16 auto
dis dch 15 auto

LD 60 DISL 46

 

[johnpoole]

if it's a tmdi, dis tmdi 46.. and if it has daughter boards

john poole
bellsouth business
columbia,sc

 

[JackOldham]

I think there is some confusion here..... I see that both the dch 15 and BDCH 16 neither reside on loop 46 according to the provided printout.You are good to go to disable loop 46. As John mentioned, DISI (which is a frendly disable)loop 46, once disable4d as noted by PRI code...then do what you need to do then enable. The d-channels will not be impacted unless something else you do to that pri card INI's the PBX.

 

[NorstarOption]

That's how I did it. I disabled the loop and reseated the card without disabling the dch. The switch did not ini.

 

[johnpoole]

ini's can be your friend, the boss knows how lucky he has you there, after all you got the switch up so fast!

john poole
bellsouth business
columbia,sc