RES3700 V5.5, Adding WS5A, Micros Application Starter.....then nothing

[mrwonderfulsaloon]

Hi everyone,

One of my workstation 610 went down. Could not find a replacement, but did find a WS5A unit in good condition. Plugged it into the network, made the appropriate changes in POS Config and then ran CAL.
I am at a point now where the MICROS Application Starter runs and I get green lights for MDS Host, Client Trust and POS Operations. Yellow for the rest. Server sees the workstation and has a green arrow. In cal the server shows up, the workstation show up with correct IP's. MDShost is correct with IP's.

After it runs, the application starter disappears and then it returns to the windows screen.

UNIT BEING ADDED: WS5A-windows XP, POS 2009

CURRENT SERVER: RES 3700, VER 5.5

Is there a reason everything is lighting up green as it should but my restaurant isn't popping up after?

 

[CathalMF]

Open the 3700d log on the server and see what it says for that workstations name.



Specialist in creating custom applications for the Micros POS range: 3700, 9700, Simphony FE, Simphony. SIM Scripts, Data Exports, Simphony extension applications, API Creation and integration. If you need anything please contact me via my website

http://www.microspostools.com/

 

[mrwonderfulsaloon]

Hey CathalMF,

Under logs the workstations are named WK6-01, WK6-02, WK6-03, WK6-04

 

[mrwonderfulsaloon]

under platform type in network node, should I be putting WS-4LX,5,5A or WINDOWS (32 or 64 bit)
This WS5A is running on windows XP with posready2009

 

[CathalMF]

Windows 32/64.

Specialist in creating custom applications for the Micros POS range: 3700, 9700, Simphony FE, Simphony. SIM Scripts, Data Exports, Simphony extension applications, API Creation and integration. If you need anything please contact me via my website

http://www.microspostools.com/