RES 5.7 Autosequences fail

[microscrazy]

Running 5.7.x and after my EOD runs (4:02am) the ability to run reports seems to fail. Reports from the Micros Server just go to the small Grey box and reports from the terminals just say running and then drop out. Only resolution I have found to work so far is a reboot of the server. This is not fun as the locations are all 24/7.

Anyone run in to this? If, so a possible resolution?

 

[Scacea]

Just to get this right. When you try to run a report from the server you get a grey window.

 

[Jackba]

You can restart the Micros remoting service instead of the server and see what happens

 

[Scacea]

There is a script that restarts the services
Have a look here you can find loads of good and interesting things

https://community.oracle.com/blogs/...ros-win32-workstations-and-tablets-for-caling

 

[microscrazy]

When I would restart the remoting service it still did not respond accordingly. Hence the reason for the request

 

[microscrazy]

I have tried everything but a repair of the software. and reapply of the last SP. May try that this afternoon.