Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Report

Status
Not open for further replies.

GTVaughan

Technical User
Mar 30, 2005
15
CA
Hello Again,

Need some more help..

Is there a way to print a report that will show the TN, Extension and the name that is allocated to the TN.

Thank you

Keren
 
LD 20
REQ: prt
TYPE: tnb
TN <-- enter
CDEN <-- enter
CUST <-- enter
DATE <-- enter
PAGE <-- enter
DES <-- enter


This will list all TN's.

i2007
 
You could also print a DNB, which gives you every extension and associated hardware information.

Code:
>LD 20
REQ: PRT
TYPE DNB
CUST 0
<carriage return through>

Arch
 
also try ld 81, lst cust 0 then at the feat prompt enter sets.. that will give you a one line per set print, but does not give you all the numbers on a digital set

john poole
bellsouth business
columbia,sc
 
Thank you everybody!! You guys are good.

Keren
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top