Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

REPLACED MMP40 1

Status
Not open for further replies.

67msarge

Technical User
Aug 18, 2010
10
US
Well, had to replace the mermail processor this weekend to get voice mail back up. now I'm getting these scrolling messages on the system terminal and its driving me nuts. Any body have an idea on how to fix this?

Lee


CSLM00 I MTY
CSLM00 IN 3D901A31 OUT 00000000 QSIZE 00000000061E9 QSIZE 00000000 0
CSLM00 IN 3D87FAB3 OUT
CSLM00 01 08 00 00 00 00 13 25 0110 00 12 4A 0C 19 0E 91 00 00 03=

CSLM00 I MTYP=25 POLL TN=0 TIME=10:32:44E=10:30:328 O MTYP=12 ANS

CSLM00 O MTY
CSLM00 IN 3D901AB6 OUT 3D901AB7 QSIZE 0000000000000 QSIZE 000000000L
CSLM00 IN 3D882231 OUT
CSLM00 01 08 00 00 00 00 13 25 0100 00 12 49 0C 11 0E A2 00 00 04

CSLM00 O MTYP=25 POLL TN=0 TIME=10:32:5096 04 00 00 02 4E 000000001

CSLM00 I MTY
CSLM00 IN 3D904230 OUT 00000000 QSIZE 00000000E 01 08 48 02 7A AA 4A 02LM00 IN 3D8822C3 OUT
CSLM00 01 08 00 00 00 00 13 25 010000000000
CSLM00 88 86 96 04 00

CSLM00 I MTYP=25 POLL TN=0 TIME=10:32:50 14F 0C 11 0E 8D 00 00 01

CSLM00 I MTY
 
and you mail is working right?

your aml up stable? you may need a reboot or just a lamp audit to clean that up

john poole
bellsouth business
columbia,sc
 
johnpool,
yes mmail is working okay. I'll have to try the rboot over the weekend. Thanks for the response......,,,,Lee
 
wish i could help more.. you could drop your aml.. and try to re-sstablish..

be sure lamp audit is on switch wide..prior to rls 3 default was on

john poole
bellsouth business
columbia,sc
 
We were thinking there may be some dip switch settings on the card that were not set correctly..... I'll try the aml too. Don't have a clue about the lamp setting...can you expound on it?

Lee
 
I may be way off base here, but are you sure aml monitoring didn't get turned on somehow?
See the commands in Overlay 48
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top