I have a dead hdisk in my ssa array that needs to be replaced. it's been so long since i've done this i forgot the command syntax to remove the disk.
i have 14 disks mirrored, hdisk2-hdisk8 are mapped together and hdisk10-hdisk16 are together then they 2 sets mirror each other.
should i do a
rmlvcopy <lvname> 1 hdisk10
or
rmlvcopy <lvname> 1 hdisk10 hdisk11 hdisk12 hdisk13....
i have 14 disks mirrored, hdisk2-hdisk8 are mapped together and hdisk10-hdisk16 are together then they 2 sets mirror each other.
should i do a
rmlvcopy <lvname> 1 hdisk10
or
rmlvcopy <lvname> 1 hdisk10 hdisk11 hdisk12 hdisk13....