Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Repeater for Digital Extension?

Status
Not open for further replies.

Guest_imported

New member
Jan 1, 1970
0
Are there any solutions (repeaters or modems) for the using of digital extensions at long lines (few km)? Thanks
 
Your solution is RDE3000 (Remote Digital Extender) consisting of two boxes (remote and local). You need a S0-Interface in the MD110 and a S0-Interface in remoteside.
But I think RDE3000 will be replaced by RDE4000
 
It's not a problem to make longer S0 interface. The task is to make longer Ericsson interface for digital extension (for MD110 or Business Phone). It's not equal to BRI U or S/T so it needs a special device to solve the problem...
 
Hello,
Your problem can be solved with Digital Line repeater I Think (Prod. No FAS 102 51/2 )
 
Hi,

DLR-3 is a Digital Line Repeater for use in an Ericsson PABX to provide a digital interface for long distances to the user. To this digital interface it is possible to connect telephones, data modems etc. that fulfil the proprietary Ericsson DASL protocol.

DLR-3 consists of two identical stand alone boxes, unit 1 connected to the exchange and unit 2 connected to a DTS.

- Maximum 1000 m between MDF and unit 1;
- Maximum 5000 m between unit 1 and unit 2;
- Maximum 1000 m between unit 2 and the DTS;

MD6
 
You can use the Ericsson 2B1Q is a Digital Line Repeater for use in MD-110 and have a max lengt of 7Km Betwen The Repeater and the phone, using two Box.
In The Ericsson web page was a PDF with the description.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top