Reouting in BC.9 2

[aau2]

Hi, I have a System in BC.9 , and I want to reeoute an incoming call for the same route. The route configuration is :
<rocap:rou=4;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
4 412010011000 5 3101000007 0 30 128 03151515 011111000031 111111

END
<rodap:rou=4;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
4 SL60 H'00000110 H'04C00000 H'060100A0 NO

END
<roddp:dest=72086;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
72086 4 1005000000000250 5 6 0 72086902404704

END

<

When is an internal call it´s works fine, but when is as incoming call for the same route it's don't work.
Please help me

 

[lalrl]

easy to explain: pcasi with IA and RA forces the unit, to jump directly from Hex-Value 1DA6 to 1DC4. All values between will be ignored. So the behaving of this unit will be changed.

 

[Avstral]

aau2,

It is not empty.
As lalrl noted, it cut out route checking for the tromboning case

Please, check up status of the trunks in your route for the next couple of weeks.
You can get looped trunks without "disconnect" signal.

Regards

 

[aau2]

And in BC.11 what can I do?. The unit RMPS5 don´t exist.The aspap 118 works?????.

 

[Avstral]

Well, as soon as we still have RMP unit, for BC11 (SP13) you can use this:

PCASI:UNIT=RMP,CI=BC11TRO,REV=1-R18A,IA=2D850,RA=2D85C;
END;
!A;
PCASI:UNIT=RMPS5,CI=BC11TRO,REV=1-R18A,IA=2F238,RA=2F244;
END;
!A;
PCACS:UNIT=RMP,CI=BC11TRO;
Y;
PCCOS:UNIT=RMP,CI=BC11TRO;
Y;

PARNUM 118 does not exist in BC11.
It works in BC12.

But you can use more elegant solution without any corrections.
Split the route you use on 2 routs (rou1 & rou2).
Incoming calls comes via rou1.
Outgoing calls use rou1 as main cho, rou2 as second cho.

Rerouted calls must use only dest for rou2.
Thats all.

Regards