Removing Voicemail from NAM keeping the Cinphony 1

[telgirl]

Hello:

Does anyone have any clear instructions OR helpful hints to offer when removing the voicemail application from a Co-Res NAM (Cinphony 1). We have encountered cross linked files and are putting in a CP150. Any help would be great! Thanks

 

[MarvO1]

telgirl, please post the version of your voice-mail. depending on what it is, I should be able to post the procedure to you.

MarvO said it

 

[telgirl]

NAM: 4.0.4E
Cinphony: 3.50.0038
MICS 5.0

Thanks

 

[MarvO1]

Here you go. Move of the file dates may be different, but this will do the trick.

This procedure is necessary when we have a Co-resident NAM (VM and Prelude/Cinphony) that has experienced the corruption problem repeatedly and are forced to fix the problem with 2 NAMs, or an additional CallPilot.


Since the existing NAM has ACD on it we make it the ACD only .

So the procedure requires we turn off VM on the cores NAM.

Assuming we have cleaned up the crosslinked files-

Access the NAM via Monitor and keyboard.

Access the OS2 prompt.

C:\
Complete the following steps:

type cd st {enter}
type nvmutil {enter}
type shutdownnvm {enter}
type t {enter}
type q {enter}

type cd.. {enter}
from c:\ type cd access2\startup\stbin {enter}
type dir {enter}

You should see the following directory listing

Directory of C:\ACCESS2\STARTUP\STBIN

. <DIR> 11-07-99 10:37p
.. <DIR> 11-07-99 10:37p
ST EXE 630784 5-04-99 12:42p
NVMMGRSV EXE 143872 5-04-99 12:46p
MBXMGRSV EXE 96256 5-04-99 12:47p
OPRMGRSV EXE 13824 5-04-99 12:47p
SMTPSRV EXE 45056 5-04-99 12:43p
DSKTP EXE 58368 5-04-99 12:44p
8 file(s) 988160 bytes used
1530368 K bytes free

You might see other files but they will not need to be renamed



type rename st.exe st.old {enter}
type rename nvmmgrsv.exe nvmmgrsv.old {enter}
type rename mbxmgrsv.exe mbxmgrsv.old {enter}
type rename oprmgrsv.exe oprmgrsv.old {enter}
type rename smtpsrv.exe smtpsrv.old {enter}
type rename dsktp.exe dsktp.old {enter}

type cd.. {enter}

you should see c:\access2\startup

type cd.. {enter}

you should see c:\access2

type cd runtime {enter}

type del sekur*.* {enter}

Ensure that set relocation is turned off.

Re-boot the NAM

Connect the new CallPilot to the KSU and power up.



MarvO said it

 

[telgirl]

Thank you very much! The notes say "assuming we have cleaned up the crosslinked files-"...would you have instructions for cleaning up the crosslinked files?And finally, any issues once the CP150 is running on the MOD with the Cinphony stand alone? Thanks again for all of your help.

 

[VencomRob]

I have a PDF from Nortel on this. It's ITAS tip 280.