Jul 27, 2011 #1 Merkery Technical User Jun 17, 2011 11 US Greetings, How do I remove a phone from the system so I can recover the license? I tried: ld 20 REQ out TYPE i2004 TN 64 02 and the system returns SCH1509 So, what am I missing? Thanks in advance!
Greetings, How do I remove a phone from the system so I can recover the license? I tried: ld 20 REQ out TYPE i2004 TN 64 02 and the system returns SCH1509 So, what am I missing? Thanks in advance!
Jul 27, 2011 #2 bhassell2000 Technical User Jul 28, 2009 1,658 US it must be deaquired first if it is an ACD set Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell Upvote 0 Downvote
it must be deaquired first if it is an ACD set Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell
Jul 27, 2011 Thread starter #3 Merkery Technical User Jun 17, 2011 11 US I de-acquired the phone in Symposium. Symposium > Configuration > phonesets/Voice ports ... unacquired the TN and then deleted it. If I'm supposed to unacquire it in the CS1000, please be more specific .. load, commands, etc. Thanks Upvote 0 Downvote
I de-acquired the phone in Symposium. Symposium > Configuration > phonesets/Voice ports ... unacquired the TN and then deleted it. If I'm supposed to unacquire it in the CS1000, please be more specific .. load, commands, etc. Thanks
Jul 27, 2011 #4 bhassell2000 Technical User Jul 28, 2009 1,658 US in symposium, if you unaquired it and then deleted it in the PBX you are done Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell Upvote 0 Downvote
in symposium, if you unaquired it and then deleted it in the PBX you are done Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell
Jul 27, 2011 Thread starter #5 Merkery Technical User Jun 17, 2011 11 US so how do I delete it from the PBX? I tried "out" and that didn't work. Upvote 0 Downvote
Jul 27, 2011 #6 bhassell2000 Technical User Jul 28, 2009 1,658 US it should work if the set is deaquired in the symposium Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell Upvote 0 Downvote
it should work if the set is deaquired in the symposium Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell
Jul 27, 2011 1 #7 bigindian65 Technical User Dec 27, 2006 4,597 US ld 48 dacr agt <tnb> may be acquired by more than just sym, ld 48 will remove all. Mato' Was'aka Upvote 0 Downvote
Jul 27, 2011 #8 bhassell2000 Technical User Jul 28, 2009 1,658 US Good call Biggie, I forgot about that command! Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell Upvote 0 Downvote
Good call Biggie, I forgot about that command! Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell
Jul 27, 2011 Thread starter #9 Merkery Technical User Jun 17, 2011 11 US Thanks for all the help !! Upvote 0 Downvote