Removing (outing?) an IP phone 1

[Merkery]

Greetings,

How do I remove a phone from the system so I can recover the license?

I tried:

ld 20
REQ out
TYPE i2004
TN 64 02

and the system returns
SCH1509

So, what am I missing?

Thanks in advance!

 

[bhassell2000]

it must be deaquired first if it is an ACD set

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Merkery]

I de-acquired the phone in Symposium.

Symposium > Configuration > phonesets/Voice ports ...

unacquired the TN and then deleted it.

If I'm supposed to unacquire it in the CS1000, please be more specific .. load, commands, etc.

Thanks

 

[bhassell2000]

in symposium, if you unaquired it and then deleted it in the PBX you are done

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Merkery]

so how do I delete it from the PBX?

I tried "out" and that didn't work.

 

[bhassell2000]

it should work if the set is deaquired in the symposium

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[bigindian65]

ld 48 dacr agt <tnb>

may be acquired by more than just sym, ld 48 will remove all.

Mato' Was'aka

 

[bhassell2000]

Good call Biggie, I forgot about that command!

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Merkery]

Thanks for all the help !!