Removing NPA? 1

[Guntha]

I added an NPA instead of an NXX on my Option11 (yes Newbie)

How can I go about removing the NPA?

I tried (LD90)
out
0
net
ac1
npa
827 (area code that should have been a prefix)
<cr>

i then got another NPA prompt and CR'ed thru that. tehn I tried adding the NXX

ld 90
new
0
NET
AC1
NXX
827 and get ESN072 error.

I could really use some help. thanks Guys!!
G

 

[Seavine]

The ESN0072 Error means that the specified NXX already exists... You may want to do a NXX print out and make sure that the NXX does not exist alreay.

LD 90
REQ PRT
CUST 0
FEAT net
TRAN ac1
type NXX

This should list all the NXX...
Hope this helps.

 

[TAnselm]

That error code says the NXX already exists. I may be pointing to the wrong RLI.

First print a good local NXX to check the RLI
then print the NXX in question to see what the RLI of that one is and change it if necessary.

 

[johnpoole]

prt, then change, then print

err esn072 NPA, NXX, etc., specified, already exists... if the nxx does not print, try the 8

prt
0
net
ac1
nxx
8

the cr through,


john poole
bellsouth business
columbia,sc

 

[Guntha]

I printed the NXX (827) and I get error ESN073

then I tried
prt
0
net
ac1
nxx
8

and all my 8xx NXX numbers showed up but no 827.

Sorry for my ignorace but is there something I am missing?

G

 

[phonz1]

could it be an NPA or SPN??

 

[Guntha]

I mastakenly added 827 as an NPA (receptionist said are code then the next day said she meant prefix)

so it is an NPA that I cannot out, as well as being an NXX tha i Need to add.

 

[bigindian65]

out
0
net
ac1
npa
1827

done and done.

Mato' Was'aka

 

[Guntha]

i wish, i did that in LD 90 and got ESN071 at the NPA prompt

any other ideas?

 

[Guntha]

Ok it worked - sorry. i guess it takes some time to clear the NPA out? cuz when I went to add the NXX this morning it worked perfectly

Thank you very much everyone!!!

G

 

[Seavine]

Maybe you've initially typed the NPA as 827 instead of 1827 ...