removing AST from 3904s 1

[ke123]

I have deaquired from symposium but still showing acquired.....How do I remove the AST from them
I have tried CHG and AST 0 X but still showing acquired.NCOS 5
SGRP 0
RNPG 4
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLD CRPD STSA
MWA LMPN RMMD SMWD AAD IMD XHD IRA NIA OLA VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFEA RCBD
ICDA CDMD LLCN MCTD CLBD AUTU
GPUD DPUA DNDA CFXD ARHA FITD CNTD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
AHA DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CDMR
CPND_LANG ENG
RCO 0
HUNT 000
LHK 4
LPK 4
PLEV 02
CSDN
SPID NONE
AST 00 03
IAPG 0
AACS YES
ACQ AS: AST-DN,AST-POSID
ASID 16
SFNB 1 2 3 4 5 6 9 10 11 12 13 15 16 17 18 19 22 24 25 26
SFRB
USFB 1 2 3 4 5 6 7 9 10 11 12 13 14 15
CALB 0 1 3 4 5 6 8 9 10 11 12
FCTB
ITNA NO
DGRP
PRI 01
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 ACD 31010 0 42087
AGN

 

[Dougo123]

ld 48
dacr agt lscu

Than out the set and rebuild, never change an acd set

 

[bigindian65]

AST x0 x3 after LD 48, Delete from Symposium.

 

[yyrkroon]

go to the CTI application that has it and remove the association.

The set is acquire as a DN and POSID - which means its not symposium

 

[ke123]

deaquired phone from symposium first then changed AST x0 x3...removed it from chg option in ld 20. worked fine....thanks