Removing a STMI card from a trunk group.

[jschnarkey]

Greetings,
HiPath V7.
I have a trunk group with 4 STMI cards. The second card was downed by AMO several months ago and now needs to just be removed from the trunk group and re purposed.
Procedure please? For the sake of programming commands, it is 1-7-1, TG-100.
It is going to be part of a new TG that connects to a Cisco CUCM in the very near future. Today it is part of TG-100 that connects to an OSV

Thanks,
Jake S

 

[sbcsu]

If all the trunks on the different cards are in the one trunk group then just delete the trunk
DEL-TDCSUEN=

 

[jschnarkey]

Thank you. As easy as I thought it might be!