Remove Hot D FTR from Analog Extention

[Instatron]

A IT Tech I used to work with called and asked for help in setting up a hot d to dial an external 800 number, I tried it on an extension I have for testing, used info from this site and got it to work with no problem, the thing is, now I cant undo it..
That brought up some questions, I added the CLS MNL, how do you remove the cls mnl ? I tried putting an "X" before the HOT in the FTR but that didn't work it returns no error but still rings the number I have it set to dial, I tried entering cls EHTD, but it seems that since I used the mnl cls that has no effect?
Also if I wanted to see this HOT D FTR I added how could I print it? you wouldn't see it by printing the ext by tnb, will I have to out and rebuild the extension to get rid of it?
Thanks in advance.

 

[bignose21]

The FTR's are listed at the bottom of the TNB

you can

REQ chg
TYPE 500
TN l-s-c-u
ECHG yes
ITEM ftr xhot
FTR
ITEM

 

[Instatron]

Thanks for your reply,
Ok, but now when I pick it up its ringing to the operator console, is that because it still has the CLS of MNL? I compared it to another extension and that's the only difference I can see?

 

[KCFLHRC]

Yes, change it to DTN

 

[Instatron]

Ah Yes.. Thanks so much, I get it now, you don't turn MNL off you change it back to Digitone..DTN...
That calls for a Duh.. on me.