Hey I was curious if anyone could give a tip on how to setup a script so that if a call was queued to skillset and wanted to be removed from skillset and return to a menu they could press a key?
e.g.
OPEN VOICE SESSION ACCESS_DN
PLAY PROMPT VOICE SEGMENT RETURN_TO_MENUX
COLLECT 1 DIGITS INTO RETURN_MENU_CHOICE
INTER DIGIT TIMER 3
END VOICE SESSION
IF RETURN_MENU_CHOICE = 1 THEN EXECUTE MENU_SECTION END IF
Where RETURN_TO_MENUX is a voice segment, RETURN_MENU_CHOICE is a Call variable (DN) and MENU_SECTION is a section in the script
To handle this via the basic IVR functions of Symposium (so without the Access ports) it is more difficult:
GIVE IVR MAIL_DN WITH TREATMENT 123456
Where MAIL_DN is a global DN variable which is the prompt maintenance one)
In MerMail you should setup a Voice menu with ID 123456
Fill in the options you would like to have, as action assign CL and for the calling number a new CDN (Of course also point the Voice Menu 123456 in the Voice Service DN Table to the correct entry)
This CDN should be aquired in Symposium and be routed to the same script as it came from.
The insert a section which allows this CDN to skip the welcome message.
The disadvantage is of course that this requires many CDN's, but it works.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.