Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remove a TN from DN 2

Status
Not open for further replies.

tekky1

IS-IT--Management
May 20, 2014
6
CA
Hey all,

Just have a quick rookie question you guys can probably answer easily.

I am looking to remove TN 000 0 05 04 V KEY 02 off DN 299 but I have searched the internet everywhere looking for commands on how to remove a TN from a DN and couldn't find anything. Basically we want 299 to stop ringing on another ext. Any help is appreciated.

REQ: PRT
TYPE: DNB

CUST 0
DN 299
DATE
PAGE
DES

DN 299
CPND
NAME Steve Miller
XPLN 27
DISPLAY_FMT FIRST,LAST
TYPE SL1
TN 000 0 05 04 V KEY 02 DES A 5 MAR 2012
(3903)
TN 000 0 03 03 V KEY 00 H MARP DES A 9 MAR 2008
(3903)
 
I think what you want to do is remove the DN off the TN. NUL key 2 on TN 000 0 05 04. It will remove the appearance on that telephone.

REQ CHG
TYPE 3903
TN 000 0 05 04
ECHG YES
KEY 2 NUL
 
Thanks Nodal for the response.

I tried what was above in LD 11 and LD 20 and it takes everything until I get to the KEY 2 NUL part, it just keeps repeatedly asking for ITEM over and over.

REQ: CHG
TYPE: 3903
TN 000 0 05 04
ECHG YES
ITEM KEY 2 NUL
KEY 2 NUL​
KEY 2 nul​
 
After you do key 2 nul then just return through it
 
Thank you both very much for your help, that worked!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top