Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
remotely connect to Call Pilot
- Thread starter raheem
- Start date
If you are using a stand alone CallPilot you can set up the modem through F983 put in password and press 4 and turn the modem on. You can download the CallPilot utilities from Nortel and get the CPSecureModem. To access the CallPilot you turn the CP modem on and then call the site and when the AA answers open the Sys Admin mailbox but instead of the usual password you put in the modem password. It will then count down and when it does you press OK from your computer to connect. Open your web browser & put in the IP of the CallPilot which default is 92.168.110.10. Or you can use NRU and connect that way, but you won't be able to change the Class of Service through that interface.
- Status
Similar threads
