Remote paging

[stevomorrison]

I have a customer who has recently changed from a MICS with an application module to a BCM 400. On their old MICS they could call a line wait for a beep, enter a password, and enter *630 to page over the speakers in the building. I know there is 3rd party hardware such as Viking which can allow for this but i do not see any hardware at their site to make this work. I have being installing Nortel for quite awhile and I've never heard of a way of doing this through voice mail. Have I been mistaken.

 

[MagnaRGP]

if you have an ATA attached to an analog station port on a Bogen TMB (? I forget which module), you could dial the extention # of the ATA from AA and page.

Could be risky though with nuisance pages.

 

[bluemr2]

Set up DISA and you can do the exact same thing.

 

[TWISTEDAPP]

If voicemail is answering the phones there, you could simply put a park and page branch that is not menued on either the primary or secondary branches of a CCR tree.