Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remote Notification

Status
Not open for further replies.

voip64

Technical User
Feb 12, 2009
78
US
I have added a permission of 91618 to an RPL (Long Distance 1) and assigned this to a COS. I have assigned this COS to a MBX and left a message on this MBX only to see the remote notification on the MBX turned off after one attempt due to an invalid target number. I can dial the LD number from a phone and I have other LD remote notification numbers in my Long Distance 1 RPL. I feel very comfortable with RPL's and COS on Pilot and since I was simply adding another permission to an existing RPL, I am at a loss as to what the problem is.
 
It could be the CP port that is attempting to dial out has either a restricted COS or a TARG on it, preventing the port from dialing out. You may want to check the ports.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top