Remote Management over modem on AUX-Port

[marty74]

Hello,

can anybody tell me how I configure a modem on AUX-Port for managing my CISCO Router remotely?

My problem is:
25 miles away is a part of our company. If I make some mistakes (what happens ( ) I always take my car and drive to it. Now I have a modem. Can I use this to manage my router if nothing works over the network?

Thanks for all your help.

Marty

 

[scraig84]

It's pretty simple - here's what we use:

line aux 0
modem InOut
modem autoconfigure discovery
transport input all
speed 115200


Other than that, you'll just need a straight-through cable and a DB25 connector.

 

[marty74]

Thanks so far. I will try it tomorrow.

Thanks for your fast answer.

Marty

 

[benzito]

Also add password protection to your aux port config (to thwart war dialers and the like)

!
login
password xxxxxxx
!

 

[marty74]

Hello thanks a lot to all,

it works now yeahhhhhhhhhhhh...I am happy.

Thanks for the help. I hope I can help you sometimes too.

Thanks a lot ))

Marty

 

[writemem]

ok what am i doing wrong. i have followed these configs and i see garbage on the screen when i connect and hit enter. is there some sort of key sequence i need to follow