-
3
- #1
maccabee333
Programmer
Hi Guys, I was just going through some old posts and realized I didn't ever post my solution to this.
Basically even though the Cisco was set to be completely open the phones still wouldn't register correctly.
We spent a long time looking at this with Avaya and they came up with this. In NoUser source code add REMOTE_H323=1800 This changes the port being used by the handsets and gets round the Cisco's annoying little sniffers.
Hope this helps someone as much as it did me.
Ian
APSS,ACIS,ACSS
trained on SplicCom but who wants to know that.
follow me on Twitter @TheIanMac
Basically even though the Cisco was set to be completely open the phones still wouldn't register correctly.
We spent a long time looking at this with Avaya and they came up with this. In NoUser source code add REMOTE_H323=1800 This changes the port being used by the handsets and gets round the Cisco's annoying little sniffers.
Hope this helps someone as much as it did me.
Ian
APSS,ACIS,ACSS
trained on SplicCom but who wants to know that.
follow me on Twitter @TheIanMac