Remote Extn In BC12 Part 2 1

[nadap001]

Hi again,
With REEXP enabled as Mobile, I have the default as my desk phone 15333, and mobile as additional number.
When I dial from my mobil into remote extn and then dial *9# the REEXP print shows my mobile without the route access code, ( 9 ) So dialling my remote extn number fails.
I tried entering route access code + external number in NUTRP but couldnt call in. Any idears ??

<reexpIR=16910;
REMOTE EXTENSION DATA
DIR TYPE DEFAULT POSITION ACTIVE POSITION
16910 MOB 15333 0795725xxxx

END

<

 

[mundus]

Hi' make a NUTRP; and a RODDPEST=x; for the route dest.

 

[whosrdaddy]

just add this to nutri (untested):
I assume your mobile number has unknown TON

nutri:entry=07,cnvtyp=1,numtyp=0,pre=9;

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[nadap001]

Thanks whosrdaddy

 

[lalrl]

Why should it be untested? This is standard for MEX and even more for a right function of NLOG in our market - for all possible leading digits in local, national and international A-numbers (1-9, 01-09, 000-009), with different cnvtyps (0, 1 and 2).

Only with this nutri-entries, the dest can come in front of the nlog-entry or in front of the active MEX-position