remote dialing over IP Trunks

[rspringer]

I may have missed a thread search on here for this, forgive me if I have. I have 3 IP Office systems,406 V2, 1 in US and 2 in England. I can dial 3 digits between sites OK over my IP Trunks but what I am wanting to do is when I make a call to the UK from the US, I want to be able to go over the IP Trunk and dial out from their switch locally so as not to incur international charges. Has anyone set this up before?

 

[intrigrant]

Here is a doc:

http://marketingtools.avaya.com/kno...edProjects/bulletins/techtips/129_techtip.htm

NIHIL NOVI SUB SOLE

 

[RotoOrb]

piece of cake, you already have the ip links in place, couple of ways to do it,

1. just make a shortcode eg, 00N Dial 00N linegroup XX
xx being the ip trunk to the appropriate switch

2. same shortcode, and then put tin the lcr/ars depending on ver, 00N dial 00N line xx then step down to isdn/analogues if trunk busy

 

[rspringer]

Thanks You, I will give that a shot.