RSVisionary
IS-IT--Management
Any assistance is greatly appreciated!
Remote location has a static SBC connection coming into it. From the DSL modem this connects to a Linksys Router. I have opened the port 3389 and set to forward to the only machine at this location. When I am at the locatin I can remote into it fine with my laptop using mstsc "TS Client". When I am anywhere else, I get the standard too busy can't see it error.
The odd part is SBC has the static IP in the router set to 66.**.**.49, and when I go to it says the IP is 66.**.**.54, which is in the router set as the Gateway.
Trying either one as my 66.**.**.**:3389 address in TS still give me the error when I am trying to connect from anywhere else. I have disabled the Firewall on the router to see if that was it and got nothing...please advise this is Very important! Thanks,,,
Eric
Remote location has a static SBC connection coming into it. From the DSL modem this connects to a Linksys Router. I have opened the port 3389 and set to forward to the only machine at this location. When I am at the locatin I can remote into it fine with my laptop using mstsc "TS Client". When I am anywhere else, I get the standard too busy can't see it error.
The odd part is SBC has the static IP in the router set to 66.**.**.49, and when I go to it says the IP is 66.**.**.54, which is in the router set as the Gateway.
Trying either one as my 66.**.**.**:3389 address in TS still give me the error when I am trying to connect from anywhere else. I have disabled the Firewall on the router to see if that was it and got nothing...please advise this is Very important! Thanks,,,
Eric