Remote Desktop Access

[robertlc98]

Our company has a development project that requires more HP workstations the we actually have. With the use of Exceed we're now sharing workstations.

My problem is that I have a couple workstations which I cannot exceed to - meaning I don't get the logon screen. This problem only exists only with a few workstations, not all of them.

I've made sure the hosts file contains the needed remote information and the /etc/rc.config.d/netconf looks the same (except for the ip address).

Could I be missing a process? or do I have a configuration problem?

Thanks,
Robert

 

[bi]

Do the systems you can't connect to with Exceed have the same X11 and/or CDE filesets on them? Run an swlist -l fileset on a system you can use Exceed to connect and a system you can't and compare the two. Can you connect to the systems through a vt100 terminal (like a DOS box on Windows)?

 

[robertlc98]

Yes, I can telnet to these systems.

Robert

 

[bi]

What about the filesets?

 

[robertlc98]

The differences in the CDE filesets are:

CDEDevKit B.11.00.01 CDE Developer Kit
CDEDevKit.CDE-DEMOS B.11.00.01 Demo Applications
CDEDevKit.CDE-HELP-PRG B.11.00.01 Help Developer Apps
CDEDevKit.CDE-INC B.11.00.01 Header files
CDEDevKit.CDE-MAN-DEV B.11.00.01 Developer Man Pages
CDEDevKit.CDE-PRG B.11.00.01 Developer Libraries

and there no differences in the X11 filesets.

Robert

 

[bi]

Are you trying to connect using the IP or the name of the workstations? (If you can't tell, you are getting close to the end of my X windows knowledge! I hope someone in the forum jumps in to help!)