OldSiemensGuy
IS-IT--Management
Any suggestions on remote access to a Meridian Opt11? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remote Access
- Thread starter OldSiemensGuy
- Start date
- Status
You can use a modem, recommend US Robotics Veverything as they have external switches that allow you to dumb down the modem. If the Opt11 serial port gets to many extraneous mesages, which auto bauding will cause, etc, the port will lock out.
Or you can use the ehternet port on the Opt SSC card. For this you need to set up an embedded LAN as the Opt11 ehternet port can't handle zip broadcast/traffic. Also, you need to set up RLOGIN, so you need an app like reflections. There are quite a few posts on this site on how to set this up.
Or you can use a termserver. I use both Lantronix & Digiterm products. This setup is by far the easiest to set up & more reliable than modems. I am assuming of course that you have access to the LAN, if not, your choice is a modem
Or you can use the ehternet port on the Opt SSC card. For this you need to set up an embedded LAN as the Opt11 ehternet port can't handle zip broadcast/traffic. Also, you need to set up RLOGIN, so you need an app like reflections. There are quite a few posts on this site on how to set this up.
Or you can use a termserver. I use both Lantronix & Digiterm products. This setup is by far the easiest to set up & more reliable than modems. I am assuming of course that you have access to the LAN, if not, your choice is a modem
- Thread starter
- #3
- Status
Similar threads
