does anyone have an idiots guide for this? I want to be able to go onto the network in my office, from home. I have installed remote access desktop-not sure what to do next! I have tried to do it through VPN but it wont connect to the server using the ip address I have given it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
remote access
- Thread starter 060159
- Start date
- Thread starter
- #3
First you need to configure your VPN using 2 routers one at the office and at your home. You will need a static IP provided by your ISP for each of these location. Next setup your servers Terminal Service for administrator mode, also make sure port 3389 is open on your router. Now using Remote Desktop type in the IP address (the static IP) where the server is and you should connect. Hope this helps.
- Status
Similar threads
- Locked
- Question
- Locked
- Question